LMV331-N, LMV339-N, LMV393-N

www.ti.com

SNOS018G – AUGUST 1999 – REVISED FEBRUARY 2013

Figure 21. Driving CMOS

Figure 22. Driving TTL

AND GATES

The comparator can be used as three input AND gate. The operation of the gate is as follows:

The resistor divider at the inverting input establishes a reference voltage at that node. The non-inverting input is

the sum of the voltages at the inputs divided by the voltage dividers. The output will go high only when all three

inputs are high, casing the voltage at the non-inverting input to go above that at inverting input. The circuit values

shown work for a "0" equal to ground and a "1" equal to 5V.

The resistor values can be altered if different logic levels are desired. If more inputs are required, diodes are

recommended to improve the voltage margin when all but one of the inputs are high.

Figure 23. AND Gate

Copyright © 1999–2013, Texas Instruments Incorporated

Submit Documentation Feedback

15

Product Folder Links: LMV331-N LMV339-N LMV393-N