Pressure Sensors

FS01/FS03 Force Sensors

FS Series

Sensing and Control

FEATURES

• 0 to 1.5 pounds and 0 to

3.0 pound ranges

• High-level output range

• Temperature compensated

• Calibrated zero and span

• Small size

• Low noise

TYPICAL APPLICATIONS

• Medical infusion pumps

• Ambulatory noninvasive

pump pressure

• Occulsion detection

• Kidney dialysis machines

• Load and compression

sensing

• Variable tensions control

WARNING

PERSONAL INJURY

DO NOT USE these

products as safety or

emergency stop devices or

in any other application

where failure of the product

could result in personal

injury.

Failure to comply with

these instructions could

result in death or serious

injury.

The FS01/FS03 sensors are special low cost, peizoresistive-based force

sensors. These high-level voltage output, calibrated, and temperature

compensated sensors give an accurate and stable output over a 5 °C to

50 °C [41 °F to 122 °F] temperature range. They offer simple operation from

a single 5.0 Vdc supply. Operation from any DC supply voltage, up to

12.0 Vdc, is acceptable.

The FS01/FS03 sensors feature an integrated circuit sensor element and

laser trimmed think film ceramic in a small plastic housing. Their extremely

small size enables the use of multiple sensors in limited available space.

This package also provides excellent corrosion resistance and isolation to

external package stress.

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this product sheet is for reference only. Do

not use this document as a product installation guide.

• Complete installation, operation, and maintenance information is provided

in the instructions supplied with each product.

Failure to comply with these instructions could result in death or

serious injury.