DS-CPC1968-R01

www.ixysic.com

1

Characteristics

Features

 On-Resistance

Heat Sink Applications

Applications

Approvals

Pin Configuration

Description

The CPC1968 single-pole normally open (1-Form-A)

Solid State Power Relay is rated for up to 5A

continuous load current with a 5°C/W heat sink.

Optically coupled MOSFET technology enables the

isolation. The output, constructed with efficient

MOSFET switches and photovoltaic die, uses IXYS

Integrated Circuits Division’s patented OptoMOS

architecture while the input, a highly efficient GaAlAs

infrared LED, provides the optically coupled control.

The combination of low on-resistance and high load

current handling capability makes this relay suitable

for a variety of high performance switching

applications.

The unique ISOPLUS-264 package pioneered by

IXYS enables Solid State Relays to achieve the

highest load current and power ratings. This package

features a unique IXYS process in which the silicon

chips are soft soldered onto the Direct Copper Bond

(DCB) substrate instead of the traditional copper

leadframe. The DCB ceramic, the same substrate

used in high power modules, not only provides

resistance (0.3 °C/W).

Ordering Information

Switching Characteristics

Parameter

Rating

Units

Blocking Voltage

500

With 5°C/W Heat Sink

5

No Heat Sink

2

On-Resistance

0.35



0.3

°C/W

Part

Description

CPC1968J

ISOPLUS-264 Package (25 per tube)

Form-A

I

F

I

LOAD

10%

90%

t

on

t

off

CPC1968

ISOPLUS™-264 Power Relay