TL604IP datasheet(5/9 Pages) TI1

5 / 9 page

TL601, TL604, TL607, TL610

P-MOS ANALOG SWITCHES

D2161, JUNE 1976 — REVISED OCTOBER 1986

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

PARAMETER MEASUREMENT INFORMATION

Figure 1 shows power supply boundary conditions for proper operation of the TL601 Series. The range of

operation for supply VCC+ from 5 V to 25 V is shown on the vertical axis. The range of VCC− from −5 V to

−25 V is shown on the horizontal axis. A recommended 30-V maximum voltage differential from VCC+ to VCC−

governs the maximum VCC+ for a chosen VCC− (or vice versa). A minimum recommended difference of 15 V

from VCC+ to VCC− and the boundaries shown in Figure 1 allow the designer to select the proper combinations

of the two supplies.

The designer-selected VCC+ supply value for a chosen VCC− supply value limits the maximum input voltage that

can be applied to either switch terminal; that is, the input voltage should be between VCC− + 8 V and VCC+ to

keep the on-state resistance within specified limits.

VCC − — Supply Voltage — V

−5

−10

−15

−20

−25

−30

AREA

SAFE

RECOMMENDED COMBINATIONS

OF SUPPLY VOLTAGES

Figure 1

TL604IP 数据表(PDF) 5 Page - Texas Instruments