!Caution

1. The performance of chip monolithic ceramic capacitors

may be affected by the storage conditions.

1-1. Store capacitors in the following conditions:

Temperature of +5

°C to +40°C and a Relative

Humidity of 20% to 70%.

(1) Sunlight, dust, rapid temperature changes,

corrosive gas atmosphere or high temperature

and humidity conditions during storage may affect

the solderability and the packaging performance.

Please use product within six months of receipt.

(2) Please confirm solderability before using after

six months. Store the capacitors without opening

the original bag. Even if the storage period is

short, do not exceed the specified atmospheric

conditions.

1-2. Corrosive gas can react with the termination

(external) electrodes or lead wires of capacitors, and

result in poor solderability. Do not store the

capacitors in an atmosphere consisting of corrosive

gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine,

ammonia gas, etc.).

1-3. Due to moisture condensation caused by rapid

humidity changes, or the photochemical change

caused by direct sunlight on the terminal electrodes

and/or the resin/epoxy coatings, the solderability and

electrical performance may deteriorate. Do not store

capacitors under direct sunlight or in high humidity

conditions.

s Storage and Operation condition

!Caution (Storage and Operation Condition)

22

1

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C03E.pdf

10.5.20