SPECIFICATION FOR APPROVAL

DOCUMENT

: RLI00000N

REVISION

: A1

PAGE

: 7 OF 11

5-2-5 Resistance to Solvent

Without mechanical damage and distinct damage in appearance.

Immersion cleaning

At normal temperature 300 seconds in Isopropyl Alcohol.

Refer to IEC 60115-1 Sub-clause 4.29.

5-3 Endurance

5-3-1 Rapid Change of Temperature

Resistance Change :

± (0.5%)

Without distinct damage

Resistance shall be subjected to 5 cycles of the temperature cycle as following :

-55

± 3℃, 30 minutes→ room temperature, 2 ~ 3 minutes

→ +125 ± 2℃, 30 minutes → room temperature, 2 ~ 3 minutes

Refer to IEC 60115-1 Sub-clause 4.19.

5-3-2 Dump Heat with Load

Resistance Change :

± (1.0%)

Without distinct damage

60

± 2℃ with relative humidity of 90 to 95%

DC rated voltage for 1.5 hours on 0.5 hour off

1,000 + 48 / - 0 hours

5-3-3 Endurance at 70℃

Resistance Change :

± (1.0%)

Without distinct damage

70

± 2℃

DC rated voltage for 1.5 hours on 0.5 hour off

1,000 + 48 / -0 hours

Refer to IEC 60115-1 Sub-clause 4.25.