Supervisory Circuits with Watchdog and

Manual Reset in 5-Lead SC70 and SOT-23

Data Sheet

ADM823/ADM824/ADM825

Rev. D

Document Feedback

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

©2004–2013 Analog Devices, Inc. All rights reserved.

Technical Support

www.analog.com

FEATURES

Precision 2.5 V to 5 V power supply monitor

7 reset threshold options: 2.19 V to 4.63 V

140 ms (minimum) reset timeout

Watchdog timer with 1.6 sec timeout (ADM823, ADM824)

Manual reset input (ADM823, ADM825)

Push-pull output stages

RESET (ADM823)

RESET, RESET (ADM824/ADM825)

Low power consumption: 5 µA

Power supply glitch immunity

Specified over automotive temperature range

5-lead SC70 and SOT-23 packages

APPLICATIONS

Microprocessor systems

Computers

Controllers

Intelligent instruments

Portable equipment

FUNCTIONAL BLOCK DIAGRAM

ADM823

MR

GND

WDI

RESET

RESET

GENERATOR

WATCHDOG

DETECTOR

DEBOUNCE

Figure 1.

GENERAL DESCRIPTION

The ADM823/ADM824/ADM825 are supervisory circuits that

monitor power supply voltage levels and code execution integrity

in microprocessor-based systems. In addition to providing

power-on reset signals, an on-chip watchdog timer can reset the

microprocessor if it fails to strobe within a preset timeout

period. A reset signal can also be asserted by an external push-

button, through a manual reset input. The three parts feature

different combinations of watchdog input, manual reset input,

and output stage configuration, as shown in Table 1.

These parts are available in a choice of seven reset threshold

options ranging from 2.19 V to 4.63 V. The reset and watchdog

timeout periods are fixed at 140 ms (minimum) and 1.6 sec

(typical), respectively.

The ADM823/ADM824/ADM825 are available in 5-lead SC70

and SOT-23 packages and typically consume only 5 µA, making

them suitable for use in low power, portable applications.

Table 1. Selection Table

Part No.

Watchdog Timer

Manual Reset

Output Stage

RESET

RESET

ADM823

Yes

Yes

Push-Pull

–

ADM824

Yes

–

Push-Pull

Push-Pull

ADM825

–

Yes

Push-Pull

Push-Pull