AD8651/AD8652

Rev. C | Page 5 of 20

ABSOLUTE MAXIMUM RATINGS

Absolute maximum ratings apply at 25°C, unless otherwise noted.

Table 3.

Parameter

Rating

Supply Voltage

6.0 V

Input Voltage

Differential Input Voltage

±6.0 V

Output Short-Circuit Duration to GND

Indefinite

Electrostatic Discharge (HBM)

4000 V

Storage Temperature Range

RM, R Package

−65°C to +150°C

Operating Temperature Range

−40°C to +125°C

Junction Temperature Range

RM, R Package

−65°C to +150°C

Lead Temperature (Soldering, 10 sec)

300°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL RESISTANCE

JA is specified for the worst-case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 4. Thermal Resistance

Package Type

Unit

8-Lead MSOP (RM)

210

45

°C/W

8-Lead SOIC_N (R)

158

43

°C/W

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.