MP2002 datasheet(2/11 Pages) MPS

2 / 11 page

MP2002 – LOW INPUT VOLTAGE, 500mA LINEAR REGULATOR

MP2002 Rev. 1.11

www.MonolithicPower.com

10/10/2011

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number*

Package

Top Marking

Free Air Temperature (TA)

MP2002DD

QFN8 (2x3 mm)

-40

°C to +85°C

* For Tape & Reel, add suffix –Z (eg. MP2002DD–Z)

For RoHS Compliant Packaging, add suffix –LF (eg. MP2002DD–LF–Z)

PACKAGE REFERENCE

TOP VIEW

OUT

GND

EXPOSED PAD

ON BACKSIDE

Connect to GND

ABSOLUTE MAXIMUM RATINGS (1)

IN, PG, FB to GND..........................-0.3V to +7V

EN to GND.............................-0.3V to VIN +0.3V

OUT ......................................-0.3V to VIN + 0.3V

Continuous Power Dissipation

(TA = +25°C)

(2)

……………………………………………….2.27W

Junction Temperature...............................150

°C

Lead Temperature ....................................260

°C

Storage Temperature .............. -65°C to +150

°C

Recommended Operating Conditions

(3)

Input Voltage VIN ...........................1.35V to 6.5V

Output Voltage...................................0.5V to 5V

Load Current...........................500mA Maximum

Maximum Junction Temp. (TJ) ................+125°C

Thermal Resistance

(4)

θJA

θJC

QFN8 (2 x 3mm) .....................55 ...... 12 ...

°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ(MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-

TA)/ θJA. Exceeding the maximum allowable power dissipation

will cause excessive die temperature, and the regulator will go

into thermal shutdown. Internal thermal shutdown circuitry

protects the device from permanent damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7 4-layer board.

MP2002 数据表(PDF) 2 Page - Monolithic Power Systems

MP2002 数据表(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11

数据表下载