MP2004 datasheet(3/9 Pages) MPS

3 / 9 page

MP2004-DUAL, LOW NOISE, HIGH PSRR, 200mA LINEAR REGULATOR

MP2004 Rev. 0.92

www.MonolithicPower.com

4/6/2010

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS

(1)

Supply Input Voltage ................................. 6.5V

Continuous Power Dissipation

(TA = +25°C)

(2)

........................................................... 0.45W

Operation Temperature Range ... -40°C to 85°C

Storage Temperature Range ..... -65°C to 150°C

Lead Temperature (Soldering, 10sec) .....260°C

Recommended Operating Conditions

(3)

Supply Input Voltage.......................2.5V to 6.0V

Enable Input Voltage .........................0V to 6.0V

Junction Temperature Range . –40

°C to +125°C

Thermal Resistance

(4)

θJA

θJC

TSOT23-6 ..............................220 ....110. .

°C/W

Notes:

1) Exceeding these ratings may cause permanent damage to

the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ(MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-

TA)/ θJA. Exceeding the maximum allowable power dissipation

will cause excessive die temperature, and the regulator will go

into thermal shutdown. Internal thermal shutdown circuitry

protects the device from permanent damage.

3) The device is not guaranteed to function outside its operating

conditions.

4) Measured on JESD51-7 4-layer board.

MP2004 数据表(PDF) 3 Page - Monolithic Power Systems

MP2004 数据表(HTML) 3 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9

数据表下载