MP2480DN datasheet(2/12 Pages) MPS

2 / 12 page

MP2480 – 36V INPUT, 3A HIGH POWER LED DRIVER

MP2480 Rev. 1.01

www.MonolithicPower.com

1/25/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

Top Marking

Free Air Temperature (TA)

MP2480DN*

SOIC8-EP

MP2480

-40

°C to +85°C

* For Tape & Reel, add suffix –Z (e.g. MP2480DN–Z);

For RoHS compliant packaging, add suffix –LF (e.g. MP2480DN–LF–Z)

PACKAGE REFERENCE

DIM

GND

BST

VIN

TOP VIEW

EXPOSED PAD

ON BOTTOM

CONNECT TO GND

SOIC8-EP

ABSOLUTE MAXIMUM RATINGS (1)

Supply Voltage (VIN)......................-0.3V to +40V

Switch Voltage (VSW).......... -0.5V to (VIN + 0.5V)

BST to SW ......................................-0.3V to +6V

All Other Pins..................................-0.3V to +6V

Junction Temperature...............................150°C

Continuous Power Dissipation

(TA = 25°C)

(2)

SOIC8-EP ................................................. 2.5W

Lead Temperature ....................................260°C

Storage Temperature............... -65°C to +150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ..............................5V to 36V

EN and DIM Voltages ...........................0V to 5V

Maximum Junction Temp. (TJ) ..................125°C

Thermal Resistance

(4)

θJA

θJC

SOIC8-EP ...............................50 ...... 10 ... °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ(MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-

TA)/θJA. Exceeding the maximum allowable power dissipation

will cause excessive die temperature, and the regulator will go

into thermal shutdown. Internal thermal shutdown circuitry

protects the device from permanent damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7 4-layer board.

MP2480DN 数据表(PDF) 2 Page - Monolithic Power Systems

MP2480DN 数据表(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

数据表下载