MP3301 datasheet(2/11 Pages) MPS

2 / 11 page

MP3301

—1.3MHZ, 700MA, FIXED-FREQUENCY, STEP-UP DRIVER FOR WHITE LEDS

MP3301 Rev. 1.01

www.MonolithicPower.com

10/28/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

MP3301GJ*

TSOT23-5

* For Tape & Reel, add suffix

–Z (e.g. MP3301GJ–Z);

PACKAGE REFERENCE

TSOT23-5

ABSOLUTE MAXIMUM RATINGS

(1)

SW Pin .......................................

–0.5V to +44V

All Other Pins.............................

–0.3V to +6.5V

Continuous Power Dissipation .. (TA = +25°C)

(2)

TSOT23-5................................................0.57W

Storage Temperature..............

–55°C to +150°C

Recommended Operating Conditions

(3)

IN Supply Voltage ............................. 2.5V to 6V

SW Pin .............................................. VIN to 36V

Operating Junction Temp. (TJ).....–40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

TSOT23-5 ............................. 220 .... 110.. °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θ

JA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

Measured on approximately 1” square of 1 oz copper.

MP3301 数据表(PDF) 2 Page - Monolithic Power Systems

MP3301 数据表(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11

数据表下载