MP4560 – 2A, 2MHz, 55V STEP-DOWN CONVERTER

MP4560 Rev. 1.0

www.MonolithicPower.com

16

11/5/2012

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2012 MPS. All Rights Reserved.

PCB LAYOUT GUIDE

PCB layout is very important to achieve stable

operation. It is highly recommended to duplicate

EVB layout for optimum performance.

If change is necessary, please follow these

guidelines and take Figure 5 for reference.

1) Keep the path of switching current short

and minimize the loop area formed by Input

cap, high-side MOSFET and external

switching diode.

2) Bypass ceramic capacitors are suggested

3) Ensure all feedback connections are short

and direct. Place the feedback resistors

and compensation components as close to

the chip as possible.

4) Route SW away from sensitive analog

areas such as FB.

5) Connect IN, SW, and especially GND

respectively to a large copper area to cool

the chip to improve thermal performance

and long-term reliability.

MP4560

MP4560 Typical Application Circuit

TOP Layer

Bottom Layer

MP4560DN Layout Guide