DS22087B-page 10

© 2008 Microchip Technology Inc.

2.4

CHANGE THE VOLTAGE AND SPI MODE

The Memory Starter Kit also gives you the ability to change voltage or change SPI

modes by clicking on the Settings button. If you are using SPI you can select Mode 1,1

or Mode 0,0. If your device has the ability to work at multiple voltages you can select

from two on-board voltages, either 3.3V or 5.0V. In addition, the Memory Starter Kit can

provided power and ground connections. It is up to the user to make sure that his/her

device can support voltages lower than 3.3V.