With the color-coded digital waveform display, groups are created by simply placing

digital channels together on the screen, allowing the digital channels to be moved as a

group. You can set threshold values for each pod of eight channels, enabling support for

up to two different logic families.

White edges indicate additional information is available by acquiring at a higher sample

rate.

The multiple transition detection hardware of the MSO2000B Series will

show you a white edge on the display when the system detects multiple

transitions. This acts as a visual reminder that increasing the sample rate on

the next acquisition will reveal higher frequency information than your

previous settings could acquire.

The MSO2000B Series simplifies channel setup by allowing you to group

digital waveforms and enter waveform labels by using a USB keyboard. By

simply placing digital waveforms next to each other, they form a group.

Once a group is formed, you can position all the channels contained in that

group collectively. This greatly reduces the normal setup time associated

with positioning channels individually.

P6316 MSO probe

This unique probe design offers two eight-channel pods, simplifying the

process of connecting to the device-under-test. When connecting to square

pins, the P6316 can connect directly to 8×2 square pin headers spaced on

tenth-inch centers. When more attachment flexibility is required, you can

use the included flying lead sets and grabbers to clip onto surface mount

devices or test points. The P6316 offers outstanding electrical

characteristics applying only 8 pF of capacitive loading with 101 kΩ input

impedance.

The P6316 MSO probe offers two eight-channel pods to simplify connecting to your

device.

Tired of being limited to a 20 MHz bandwidth filter in your oscilloscope?

Simply turn on FilterVu and adjust the variable low-pass noise filter. Unlike

other variable low-pass filters, FilterVu filters out the unwanted noise from

your signal while still capturing glitches and other signal details up to the full

bandwidth of the oscilloscope. It does this by showing two waveforms: a

waveform that can be filtered (foreground waveform) and a glitch capture

waveform (background waveform).

The filtered waveform uses a variable low-pass filter to block out noise,

yielding a cleaner waveform to more precisely locate signal edges and

amplitude levels. The result is improved confidence in you cursor

measurements and cleaner documentation of important signal attributes.

When the noise filter is adjusted to the lowest available noise-cutoff

frequency, no more than 1% of high-frequency content that could cause the

oscilloscope to alias will pass through the filter.

The glitch capture waveform shows signal details up to the full bandwidth of

the oscilloscope. The oscilloscope captures pulses as narrow as 5 ns, using

peak-detect min/max sampling, protecting you from missing unexpected

glitches or other high-frequency events.

FilterVu is ideal for repetitive, nonrepetitive, and single-shot events.

MSO/DPO2000B Series Mixed Signal Oscilloscope

www.tektronix.com 5