MP62260/MP62261

3.3V/5V, Single-Channel 2A

Current-Limited Power Distribution Switch

MP62260/MP62261 Rev. 0.9

www.MonolithicPower.com

1

4/6/2010

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

© 2010 MPS. All Rights Reserved.

The Future of Analog IC Technology

DESCRIPTION

The MP62260/MP62261 Power Distribution

Switch features internal current limiting to

prevent damage to host devices due to faulty

load

conditions.

The

MP62260/MP62261

operates from 2.7V to 5.5V nominal input

to handle up to 2A continuous load with a 3A

typical current limit. The MP62260/MP62261

has built-in protection for both over current and

increased thermal stress. For over-current

protection (OCP), the device will limit the

current by going into a constant current mode.

When continuous output overload condition

exceeds power dissipation of the package, the

thermal protection will shut the part off. The

device will recover once the device temperature

reduces to approx 120

°C.

The MP62260/MP62261 is available in SOIC8

package.

FEATURES

• 2A Continuous Current

• 3A accurate Current Limit

• 2.7V to 5.5V Supply Range

• 90μA Quiescent Current

• 50mΩ MOSFET

• Thermal-Shutdown Protection

• Under-Voltage Lockout

• 8ms FLAG Deglitch Time

• No FLAG Glitch During Power Up

• Reverse Current Blocking

• Active High & Active Low Options

APPLICATIONS

• Smartphone and PDA

• Portable GPS Device

• Notebook PC

• Set-top-box

• Telecom and Network Systems

• PC Card Hot Swap

• USB Power Distribution

“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of

Monolithic Power Systems, Inc.

TYPICAL APPLICATION

MP62260/

MP62261

GND

IN

EN*

OUT

FLAG

SINGLE-CHANNEL

3.3V / 5V Input

To VBUS

USB Ports

1

2, 3

6, 7, 8

5

4

(*is active high for MP62261)