TC7106CLW datasheet(8/34 Pages) MICROCHIP

8 / 34 page

TC7106/A/TC7107/A

DS21455D-page 8

3.0

DETAILED DESCRIPTION

(All Pin designations refer to 40-Pin PDIP.)

3.1

Dual Slope Conversion Principles

The TC7106A and TC7107A are dual slope, integrating

Analog-to-Digital Converters. An understanding of the

dual slope conversion technique will aid in following the

detailed operation theory.

The conventional dual slope converter measurement

cycle has two distinct phases:

• Input Signal Integration

• Reference Voltage Integration (De-integration)

The input signal being converted is integrated for a

fixed time period (TSI). Time is measured by counting

clock pulses. An opposite polarity constant reference

voltage is then integrated until the integrator output

voltage returns to zero. The reference integration time

is directly proportional to the input signal (TRI). See

Figure 3-1.

FIGURE 3-1:

Basic Dual Slope Converter.

In a simple dual slope converter, a complete

conversion requires the integrator output to “ramp-up”

and “ramp-down.” A simple mathematical equation

relates the input signal, reference voltage and

integration time.

EQUATION 3-1:

For a constant VIN:

EQUATION 3-2:

The dual slope converter accuracy is unrelated to the

integrating resistor and capacitor values as long as

they are stable during a measurement cycle. An

inherent benefit is noise immunity. Noise spikes are

integrated or averaged to zero during the integration

periods. Integrating ADCs are immune to the large

conversion

errors

that

plague

successive

approximation converters in high noise environments.

Interfering signals with frequency components at

multiples of the averaging period will be attenuated.

Integrating ADCs commonly operate with the signal

integration period set to a multiple of the 50/60Hz

power line period (see Figure 3-2).

FIGURE 3-2:

Normal Mode Rejection of

Dual Slope Converter.

–

REF

Voltage

Analog

Input

Signal

–

DISPLAY

Switch

Driver

Control

Logic

Counter

Polarity Control

Phase

Control

VIN µ VREF

VIN µ1/2 VREF

Variable

Reference

Integrate

Time

Fixed

Signal

Integrate

Time

Integrator

Comparator

+/–

Where:

Reference voltage

TSI

Signal integration time (fixed)

TRI

Reference voltage integration time

(variable).

--------

∫

()dt

RTRI

---------------

VIN = VR

TRI

TSI

0.1/T

1/T

10/T

Input Frequency

T = Measured Period

Where:

FOSC

Clock Frequency at Pin 38

VFS

Full Scale Input Voltage

RINT

Integrating Resistor

VINT

Desired Full Scale Integrator Output

Swing

INT

4000

()

OSC

-------------

⎝⎠

⎛⎞ VFS

INT

-----------

⎝⎠

⎛⎞

INT

------------------------------------------------------

TC7106CLW 数据表(PDF) 8 Page - Microchip Technology

TC7106CLW 数据表(HTML) 8 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

数据表下载