AM29F002 datasheet(13/37 Pages) AMD

13 / 37 page

Am29F002/Am29F002N

PR ELIMIN A R Y

commands can be assumed to be less than 50

µs, the

system need not monitor DQ3. Any command other

than Sector Erase or Erase Suspend during the

time-out period resets the device to reading array

data. The system must rewrite the command sequence

and any additional sector addresses and commands.

The system can monitor DQ3 to determine if the sector

erase timer has timed out. (See the “DQ3: Sector Erase

Timer” section.) The time-out begins from the rising

edge of the final WE# pulse in the command sequence.

Once the sector erase operation has begun, only the

Erase Suspend command is valid. All other commands

are ignored. On the Am29F002 only, note that a hard-

ware reset during the sector erase operation immedi-

ately terminates the operation. The Sector Erase

command sequence should be reinitiated once the de-

vice has returned to reading array data, to ensure data

integrity.

When the Embedded Erase algorithm is complete, the

device returns to reading array data and addresses are

no longer latched. The system can determine the sta-

tus of the erase operation by using DQ7, DQ6, or DQ2.

Refer to “Write Operation Status” for information on

these status bits.

Figure 3 illustrates the algorithm for the erase opera-

tion. Refer to the Erase/Program Operations tables in

the “AC Characteristics” section for parameters, and to

the Sector Erase Operations Timing diagram for timing

waveforms.

Notes:

1. See the appropriate Command Definitions table for erase

command sequence.

2. See “DQ3: Sector Erase Timer” for more information.

Figure 3.

Erase Operation

START

Write Erase

Command Sequence

Data Poll

from System

Data = FFh?

Yes

Erasure Completed

Embedded

Erase

algorithm

in progress

20818C-6

AM29F002 数据表(PDF) 13 Page - Advanced Micro Devices

AM29F002 数据表(HTML) 13 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

数据表下载