7D301K datasheet(4/65 Pages) WPI

4 / 65 page

Metal Oxide VaristOrs

WORLD PRODUCTS INC. 19654 Eighth Street East, Sonoma, CA 95476 | Phone (707) 996-5201 | Fax (707) 996-3380 | www.worldproducts.com

Rev. 9.9

2 | Metal Oxide Varistors

Features

•

Our Metal Oxide Varistors have UL, CSA and VDE approvals . VDE approvals are in conjunction

with IEC61051-2 . Plus specific types comply with Accelerated Aging Test Requirements per ANSI/

IEEE C62 .11 . The factory is ISO and TS16949 certified . Taped Parts conform to EIA standards . All

electrical specifications are to industry standards with definitions conforming to IEEE specifications .

Solderability to MIL STD . Epoxy flammability rating of 94V0 .

•

RoHS Compliance - Metal Oxide Varistors utilizing suffix (-N) denoting RoHS compliant types for

disk sizes 05, 07, 10,14, 18, 20, 25, 32, 34, 40, and 53 purchased from World Products, LLC comply with RoHS

Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the

use of certain hazardous substances in electrical and electronic equipment . Our metal oxide varistors contain a

maximum concentration value of 0 .1% by weight in homogeneous materials for lead, mercury, hexavalent chromium,

polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) and of 0 .01% weight in homogeneous

materials for cadmium . See Part Number System for more details .

•

Product consistency is maintained through extremely stringent quality and statistical control . On-line automatic test

equipment provides 100% inspection .

•

Extensive selection of equivalents to essentially all metal oxide varistor types . All specifications available for proper

accurate design-in purposes .

•

Extremely low leakage current levels achieved and exceptional surge handling capability through proprietary

formulations .

•

Epoxy conformity and control providing for consistent physical dimensions and improved solderability.

•

Varistor product design flexibility and quick design cycles in order to assist our customers with their most stringent

varistor applications .

Definition of Terms (according to IEEE specifications C62.33)

Average Power Dissipation: Tested using two consecutive pulses at rated peak current using a 10/1000µs test

waveform with a minimum pulse period of 60 seconds between pulses (IEC 61000-4-5) .

Rated RMS Voltage, Rated DC Voltage: The maximum designated values of power system voltage that may be applied

continuously between the terminals of a device .

Varistor Voltage: Test characteristic that is used to classify varistors by type . A test current of 1mA DC is typically

used to determine varistor voltage classification type . Varistor voltage clamping characteristics can be defined

at various test levels .

Rated Peak Single Pulse Transient Current: Maximum surge current, 8/20μs waveform which a varistor is rated to

withstand for a single surge .

Rated Single Pulse Transient Energy: Maximum allowable energy for a single impulse (see specified waveforms) .

Maximum Clamping Voltage: Measured peak voltage across the device terminals when a current impulse of specified

amplitude and waveform is conducted through the varistor.

Typical Capacitance: Typical capacitance values are measured at a test frequency of 1KHZ .

Power Dissipation Ratings

Disk Size

Pm-watts

Disk Size

Pm-watts

5mm ( < 50 VAC )

0 .01

20mm ( < 50 VAC )

0 .20

5mm ( ≥ 50 VAC )

0 .20

20mm ( ≥ 50 VAC )

1 .00

7mm ( < 50 VAC )

0 .02

25mm

1 .20

7mm ( ≥ 50 VAC )

0 .25

32mm

1 .60

10mm ( < 50 VAC )

0 .05

34mm (Single)

2 .10

10mm ( ≥ 50 VAC )

0 .40

34mm (Dual)

2 .73

14mm ( < 50 VAC )

0 .10

40mm

2 .10

14mm ( ≥ 50 VAC )

0 .60

53mm

2 .50

NY • SOCIÉT

ISO

9002

SGS

7D301K 数据表(PDF) 4 Page - World Produts Inc.

7D301K 数据表(HTML) 4 Page - World Produts Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

数据表下载