This 12mm*12mm*4mm high gain 2.4GHz

patch antenna is ideally suited for high

performance industrial applications in Wi-fi,

ISM, Zigbee bands.

This product has highest gain in the XZ

(azimuth) plane direction, most suitable

for fixed wireless applications where

transmission and reception is focused to

one hemisphere of the device,

for example a wireless meter on a

reinforced concrete wall.

It can also be placed anywhere on

the device ground-plane, unlike most

chip or loop antennas which need to be

edge mounted.

1. Introduction

2. Key Antenna Performance Indicators*

No.

Parameter

Specification

1

Range of Receiving Frequency

2400 MHz to 2500 MHz

2

Bandwidth

100 MHz @ -7dB

3

Polarization

Linear

VSWR

3.0 max @ Center Frequency

Peak Gain

+2 dBi typ.

Impedance

50 Ohms

4

Dimensions

12mm x 12mm x 4mm

5

Operating Temperature

-40℃ to +85℃

6

Storage Temperature

-40℃ to +85℃

Termination

Ag (Environmentally Friendly Pb Free)

Original Patch Specification measured on EVB 50*50mm, actual value depends on ground-plane and housing