STM32F207VC datasheet(58/163 Pages) STMICROELECTRONICS

58 / 163 page

Electrical characteristics

STM32F205xx, STM32F207xx

58/163

Doc ID 15818 Rev 7

VCAP1

Internal core voltage to be supplied

externally in REGOFF mode

1.1

1.3

VCAP2

CEXT

Capacitance of external capacitor(4)

-2.2

µF

ESR

ESR of external capacitor(4)

0.1

Power dissipation at TA = 85 °C for

suffix 6 or TA = 105 °C for suffix 7

(5)

LQFP64

444

WLCSP66

392

LQFP100

434

LQFP144

500

LQFP176

526

UFBGA176

513

Ambient temperature for 6 suffix

version

Maximum power dissipation

–40

°C

Low power dissipation(6)

–40

105

Ambient temperature for 7 suffix

version

Maximum power dissipation

–40

105

°C

Low power dissipation(6)

–40

125

Junction temperature range

6 suffix version

–40

105

°C

7 suffix version

–40

125

If IRROFF is set to VDD, this value can be lowered to 1.65 V when the device operates in a reduced temperature range.

When the ADC is used, refer to Table 61: ADC characteristics.

It is recommended to power VDD and VDDA from the same source. A maximum difference of 300 mV between VDD and

VDDA can be tolerated during power-up and power-down operation.

This parameter range must be respected for the full application range, taking into account the physical capacitor

characteristics and tolerance.

If TA is lower, higher PD values are allowed as long as TJ does not exceed TJmax.

In low power dissipation state, TA can be extended to this range as long as TJ does not exceed TJmax.

Table 10.

General operating conditions (continued)

Symbol

Parameter

Conditions

Min

Max

Unit

STM32F207VC 数据表(PDF) 58 Page - STMicroelectronics

STM32F207VC 数据表(HTML) 58 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载