J–10

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

J

C&K 1000 Series

Miniature Slide Switches

Features/Benefits

bottom-wash cleaning

Typical Applications

Specifications

CONTACT RATING: B contact material: 0.4 VA max. @

20 V AC or DC max. Q contact material: 6 AMPS @

120 V AC or 28 V DC, 3 AMPS @ 250 V AC.

See page J-15 for additional ratings.

ELECTRICAL LIFE: 100,000 make-and-break cycles at full

load on models with B, K or P contact material; 40,000 cycles

on models with G, Q, L, M, S or R contact material.

CONTACT RESISTANCE: Below 10 m

Ω typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 109

Ω min.

DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 65ºC

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

Materials

CASE: diallyl phthalate (DAP), (UL 94V-0).

ACTUATOR: Nylon, black, standard.

HOUSING: Stainless steel.

SWITCH SUPPORT: Brass or steel, matte-tin plated.

END CONTACTS: B contact material: Copper alloy, with gold plate over

nickel plate. Q contact material: Coin silver, silver plated. See

page I-16 for additional contact materials.

CENTER CONTACT & ALL TERMINALS: B contact material: Copper

alloy, with gold plate over nickel plate. Q contact material: Copper

alloy, silver plated. See page J-15 for additional contact materials.

TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical

Data chapter

NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant.

For the latest information regarding RoHS compliance, please go to:

www.ittcannon.com/rohs.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages J–11 through J–15. For additional options not shown in catalog, consult Customer Service Center. All models

have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.

Switch Function

Mounting Style

Actuator

Contact Material

L

Gold over silver, tin-lead

Seal

I

Epoxy potted base

Actuator Color

2

Black

1

White

3

Red

7

Blue

Terminations

A

Right angle, PC thru-hole

C

PC Thru-hole

Z

Solder lug

V3

V-bracket

V4

V-bracket

W

.750" long, wire wrap

Z3

Quick connect

Models Available