PROTEKTIVE PAK

13520 MONTE VISTA AVENUE, CHINO, CA 91710

PHONE (909) 627-2578, FAX (909) 363-7331

ProtektivePak.com

DRAWING NUMBER

37500

DATE:

September

2011

STORAGE CONTAINERS

© 2011 DESCO INDUSTRIES INC.

Employee Owned

SPECIFICATIONS

Properties

Typical Values

Test Procedures/Method

Electrostatic Decay

0.01 seconds at 72°F and 11.8% R.H.

FED-STD-101, Method 4046

Surface Resistance

10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H.

for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer

ASTM D257

Surface Resistance, Low R.H. Cut-off

4% R.H.

Rockwell International Test Report of December 20, 1991

High-Voltage Discharge Resistance

Failure rate 0/5 (no oxide damage in five consecutive tests)

Rockwell International Test Report of December 20, 1991

Static Shielding

99.9% attenuation at 10kV; 99.6% attenuation at 30kV

EIA 541, appendix E, capacitive probe test

Charged Device Model (CDM) Safety

RTG >10E7 ohms at 86% R.H. or less

Rockwell International Test Report of December 20, 1991

Current-Carrying Hazard

10E3 mA at 110V; 10E3 mA at 220V

ESD from A to Z

Corrosivity

Contains 1-3 ppm reducible sulfur

FED-STD-101, Method 3005 for reducible sulfur

Antistat Transfer

No transfer

Rockwell International Test Report of January 8, 1992

Water & Isopropyl Alcohol Extraction

Surface resistance 10E8 - 10E9 ohms/square at 74°F

Rockwell International Test Report of January 8, 1992

Tests for Antistat Permanence

and 36% R.H.

Sloughing Test

Negligible surface damage at 10 cycles and <5% of surface

ASTM D4060 at 70 rpm with CS-17 abrasive-coated

damage at 200 cycles in Taber Abrasion Test.

wheels and 1000 grams load

No conductive particles abrased from surface

Rockwell International Test Report of January 8, 1992

Recyclability

Complete recyclability of package

Rockwell International Test Report of January 8, 1992

Biodegradability

Biodegradation in or on moist soil

Volume Conductivity

Conductivity from wall to wall as well as across surface

Rockwell International Test Report of January 8, 1992

to assure permanence of the antistatic property

Shelf Life

Indefinite

Made in the

United States of America

Features

•

Provides ESD and physical protection for ESD sensitive compnonets; with lid

in place, shielding creates “Faraday Cage” restricting electrostatic charges to

exterior to ship or store ESD sensitive items outside an ESD protected area

•

Available with optional lid, steel reinforcing frame for additional strength and

durability, ESD handles, and permanently static dissipative bottom foam pad

for cushioning

•

Impregnated corrugated material; greater durability than coated or printed

material

•

Constructed with double sides, double (boxes under 6” deep) or triple (boxes

over 6” deep) ends, and single (boxes under 6” deep) or double (boxes over

6” deep) thickness bottom for greater durability

•

Static dissiapative surface of 10E6 - 10E8 ohms - minimizing the potential of

rapid discharge or sparking

•

Buried shielding layer minimizing the potential of sloughing and rub-off

contamination

•

Made from 100% recycled material, and is 100% recyclable

•

No tooling cost

•

Easy assebmly without the need for tape, glue, or staples

•

Reusable, ensuring low cost

See reverse side for

available sizes.

- -

- -

- -

- -

- -

- -

-

W

- -

- -

- -

- -

- -

- -

- -

- -

- -

- -

-

D

L