AS1332_07 datasheet(2/20 Pages) AMSCO

2 / 20 page

AS1332

650mA, Step-Down DC-DC Conver ter for RF Power Amplifiers

www.austriamicrosystems.com/DC-DC_Step-Down/AS1332

Revision 1.02

1 - 19

Data sheet

1 General Description

The AS1332 is a step-down DC-DC converter designed

to power radiofrequency (RF) power amplifiers (PAs)

from a single Li-Ion battery. The device also achieves

high-performance in mobile phones and similar RF PA

applications.

The AS1332 steps down an input voltage of 2.7V to 5.5V

to output voltages ranging from 1.3V to 3.16V. Using a

VCON analog input, the output voltage is set for

controlling power levels and efficiency of the RF PA.

The RF interferences are minimized due to the fixed-

frequency PWM operation. The battery consumption is

reduced to 0.01µA (typ.) during shutdown.

Because of the high switching frequencies (2 MHz) tiny

surface-mount components can be used. Additional to

the small size the amount is also small. Only three

external components are required, an inductor and two

ceramic capacitors.

The AS1332 is available in a 8-pin WL-CSP.

2 Key Features

PWM Switching Frequency: 2MHz

Single Lithium-Ion Cell Operation (2.7V to 5.5V)

Dynamic Programmable Output Voltage (1.3V to

3.16V)

Maximum load capability of 650mA

High Efficiency (96% Typ at 3.6VIN, 3.16VOUT at

400mA) from internal synchronous rectification

Current Overload Protection

Thermal Overload Protection

Soft Start

8-pin WL-CSP

3 Applications

The AS1332 is an ideal solution for cellular phones,

hand-held radios, RF PC cards, and battery powered RF

devices.

Figure 1. AS1332 - Typical Application Circuit

AS1332

PGND

AGND

VCON

PVIN

VDD

1.3V to 3.16V

VOUT = 2.5 x VCON

4.7 µF

3.3 µH

VOUT

2.7V to 5.5V

VIN

10 µF

0.52V to 1.27V

VCON

AS1332 数据表(PDF) 2 Page - ams AG

AS1332 数据表(HTML) 2 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

数据表下载