MCP201 datasheet(13/40 Pages) MICROCHIP

13 / 40 page

DS21730F-page 13

MCP201

2.0

ELECTRICAL CHARACTERISTICS

2.1

Absolute Maximum Ratings†

VIN DC Voltage on Logic pins except CS/WAKE ................................................................................. -0.3 to VREG+0.3V

VIN DC Voltage on CS/WAKE ...............................................................................................................-0.3 to VBAT+0.3V

VBAT Battery Voltage, non-operating (LIN bus recessive, no regulator load, t < 60s)....................................-0.3 to +40V

VBAT Battery Voltage, transient (Note 1)........................................................................................................-0.3 to +40V

VBAT Battery Voltage, continuous ..................................................................................................................-0.3 to +30V

VLBUS Bus Voltage, continuous.......................................................................................................................-18 to +30V

VLBUS Bus Voltage, transient (Note 1) ............................................................................................................-27 to +40V

ILBUS Bus Short Circuit Current Limit .................................................................................................................... 200 mA

ESD protection on LIN, VBAT (Human Body Model) (Note 2) .................................................................................. >4 kV

ESD protection on all other pins (Human Body Model) (Note 2) ............................................................................. >2 kV

Maximum Junction Temperature ............................................................................................................................. 150

°C

Storage Temperature .................................................................................................................................. -55 to +150

°C

Note 1: ISO 7637/1 load dump compliant (t < 500 ms).

2: According to JESD22-A114-B.

† NOTICE: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This

is a stress rating only and functional operation of the device at those or any other conditions above those indicated in

the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods

may affect device reliability.

MCP201 数据表(PDF) 13 Page - Microchip Technology

MCP201 数据表(HTML) 13 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

数据表下载