www.austriamicrosystems.com

Revision 1.13

3 - 12

AS13985

Datasheet - A b s o l u t e M a x i m u m R a t i n g s

5 Absolute Maximum Ratings

Stresses beyond those listed in Table 2 may cause permanent damage to the device. These are stress ratings only,

and functional operation of the device at these or any other conditions beyond those indicated in Section 6 Electrical

Characteristics on page 4 is not implied. Exposure to absolute maximum rating conditions for extended periods may

affect device reliability.

(EQ 1)

Where:

The value of

The value of

Note: Exceeding the maximum allowable dissipation will cause excessive device temperature and the regula-

tor will go into thermal shutdown.

Table 2. Absolute Maximum Ratings

Parameter

Min

Max

Units

Comments

Input Supply Voltage (Survival)

-0.3

+7

V

Input Supply Voltage (Operating)

+2.5

+5.5

V

Shutdown Input Voltage (Survival)

-0.3

+7

V

Output Voltage (Survival)

-0.3

+7

V

Short-circuit protected.

Input/Output Voltage (Survival)

1

-0.3

+7

V

Power Dissipation

2

junction-to-ambient thermal resistance (

power dissipation at any ambient temperature is calculated as:

Internally limited.

Operating Junction Temperature

-40

+125

ºC

Storage Temperature Range

-65

+150

ºC

Package Body Temperature

+260

ºC

The reflow peak soldering temperature (body

temperature) specified is in accordance with IPC/

JEDEC J-STD-020D “Moisture/Reflow Sensitivity

Classification for Non-Hermetic Solid State

Surface Mount Devices”.

The lead finish for Pb-free leaded packages is

matte tin (100% Sn).