All A22/M22 Assemblies

All A22/M22 Assemblies

44

J

MOUNTING THE SWITCH ON THE

OPERATIONAL UNIT

Insert the Operational Unit into the Switch Unit, aligning the arrow

mark inscribed on the Operational Unit with the lever on the

Switch Unit, then move the lever in the direction indicated by the

arrow in the following figure.

Operational Unit

Arrow mark

Lever

J

REMOVING THE SWITCH

Move the lever in the direction indicated by the arrow in the

following figure, then pull the Operational Unit or the Switch Unit.

Since the lever has a hole with an inside diameter of 6.5 mm, the

lever can be moved in the specified direction by inserting a

screwdriver into the hole and then moving the screwdriver.

Screwdriver

J

MOUNTING/REPLACING THE COLOR

LENS

Projection, Full-guard

Grip and rotate the Color Lens with your fingers.

Half-guard Indicators

Put the tips of the Lens Tightening Tool (A22Z-3908) into the

Color Lens slot and turn the Tool.

J

ASSEMBLING THE CAP

Lighted Pushbutton Switch

Mount the Color Lens so that the protrusions inside the cap fit

into the grooves in the Operational Unit.

Grooves

Protrusion inside cap

Cap

Color Lens

Indicator

Mount the Color Lens so that the protrusions inside the

Operational Unit fit into the grooves in the cap.

Protrusion

Cap

Grooves in the cap

Color Lens