Circuit Protection

System

Page:1

Specifications are subject to change without notice.

Transient Voltage Suppressors - LCE Series

Features

Mechanical Characteristics

Rating

Symbol

Value

Units

Peak Pulse Power Dissipation by 10x1000μs test waveform

(Fig.1)(Note 1)

P

PPM

30000

Watts

Steady State Power Dissipation on

inifinite heat sink at TL=75°C (Fig. 5)

P

D

8

Watts

Operating junction and Storage Temperature Range.

T

-55°C to 175°C

°C

Notes:

Non-repetitive current pulse , per Fig. 3 and derated above TA = 25°C per Fig. 2.

1. Halogen-free

2. Rohs compliant

3. Typical maximum temperature coefficient

5. Glass passivated Chip junction in P600 package

6. 1500W peak pulse capadility at 10x1000μs waveform,repetition rate (duty

cycles):0.01%

7. Fast response time:typically less than 1.0ps from 0 Volts to BV min

8. Excellent clamping capability

9. Low incremental surge resistance

10. Typical IR less than 5μA above 12V

11. High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,

\(9.5mm) lead length, 5lbs., (2.3kg)tension

12. Plastic package has underwriters laboratory flammability classification

94v-0

TVS devices are ideal for the protection of I/O interfaces,VCC bus and other vulnerable circuits used in telecom, computer,

industrial and consumer electronic applications.

UNI

UNI

Anode

Cathode

Applications