www.micropowerdirect.com

Typical Connection

The diagram above illustrates a typical connection of the MA500RUI

series for applications that require meeting conducted EMC standards.

The units do not require external components to operate as specified.

For applications requiring very low output noise levels, the output

often be sufficient. Care must be taken in choosing output capacitors

not to exceed the capacitive load specification for the unit. For dual

output units, output capacitors should be connected from each output

to common. All external components should be mounted as close to

the unit as possible.

Input noise and surge suppression modules are available for a number

of MPD DC/DC power supplies. Contact the factory for more information.

The recommended values for components are:

Component

220 µF/100V

220 µF/100V

LCM

12 µH

12 µH

470 pF/4kV MLCC 470 pF/4kV MLCC

100 µF

100 µF

4.7 - 10 µF

4.7 - 10 µF