click here to download a schematic drawing

click here to download a schematic drawing

(you will need to have Adobe Acrobat installed on your system to do this)

Littel-Jax® COMMERCIAL PHONE JACKS

2- and 3-CONDUCTOR

Littel-Jax phone jacks mate with standard commercial phone plugs and are available

with .25 inch and .21 inch inside diameter bushings.

MIL Littel-Jax® PHONE JACKS

2- and 3-CONDUCTOR MIL-SPEC, MIL-J-641 (E)

MIL jacks mate with MIL-type phone plugs with .25 inch (6.35mm) or .21 inch (5.34mm)

diameter bushings. Numbers C11 and C12B have a non-turn locating pin which keys the

jack to the mounting surface. For low contact resistance applications, jack number C12A

has fine silver contacts on shunts and tip springs.

MOUNTING

Chassis/Panel: See Mounting Data drawing below; small

hole is required only for jacks numbers C11 and C12B

with non-turn locating pin.

Maximum Panel Thickness: .156 inch (4mm) for standard

.276 inch (7mm) long bushing; .25 inch (6.35mm) for .375

inch (9.5mm) long bushing.

NOTE: For panels thicker than .25 inch see Thick Panel

Phone Jax.