6450123-2 datasheet(2/52 Pages) MACOM

2 / 52 page

Catalog 1773096

Dimensions are in inches and

Dimensions are shown for

USA: 1-800-522-6752

South America: 55-11-2103-6000

Revised 2-10

millimeters unless otherwise

reference purposes only.

Canada: 1-905-470-4425

Hong Kong: 852-2735-1628

specified. Values in brackets

Specifications subject

Mexico: 01-800-733-8926

Japan: 81-44-844-8013

www.tycoelectronics.com

are metric equivalents.

to change.

C. America: 52-55-1106-0803

UK: 44-(0)8002-67666

Power Connectors & Interconnection Systems

MULTI-BEAM XL and MULTI-BEAM XLE Power Distribution Connector Systems (Continued)

MULTI-BEAM XL Connector

■ Expandable length to accommodate up to 36 power contacts

■ Contact spacings are expandable to accommodate higher

voltages and/or higher current requirements

■ 4-beam or dual beam power contacts available

■ Base metal made from high conductivity copper alloy

(over 98% copper) offers superior performance compared to

alternative materials

Evolution of MULTI-BEAM Power Contacts

Dual-Beam Contact

■ Original design

■ .017" thick stock

4-Beam Contact

■ .017" thick stock

■ 35A current rating

■ Features eight

independent beams

■ Parallel current paths

yield a lower contact

resistance

■ Tuned beam design

provides lower mating

forces and higher

durability life cycles

3-Beam Contact

■ Offered on new

MULTI-BEAM XLE

connector

■ .020" Thick Stock

■ 50A Current Rating

■ Improved design offers

lowest mating force

available in MULTI-BEAM

product line

■ True hot-plug design

preserves the separable

contact interface to

provide long term

reliability after hot-mate

and un-mate cycles

MULTI-BEAM XLE Connector

■ Features new 3-beam power contact

■ Two hot-pluggable power contacts to choose from:

■ 50A High power contact (35% increase compared to

MULTI-BEAM XL connector)

■ 20A Low power contact (occupies 50% less PCB space

than MULTI-BEAM XL power contact)

■ Slimmer housing design allows 40% more current in the

same space

■ Over 40% lower mating force than original MULTI-BEAM XL

connector

■ Vented housing allows for better air flow

Contact Wipe

Contact Type

Description

Sequence

Minimum Wipe

Power (or GND) Contact

Make First

Break Last (MFBL)

0.200

′′ [5.08 mm]

Power Contact

Standard

0.150

′′ [3.81 mm]

Signal Contact

Standard

0.150

′′ [3.81 mm]

Signal (trigger) Contact

Make Last

Break First (MLBF)

0.100

′′ [2.54 mm]

The MLBF power contact and the Standard Signal contact are sequenced to mate at the same time ... sequence #2.

Power Contacts

Signal Contacts

Product Configurations and Part Numbers

The connector configuration is described by reading Left-to-Right on the Plug mating interface and Right-to-Left on the

Receptacle mating interface. Custom configurations can be produced due to the modular design of the product.

Configuration Description: ACP indicates AC Power, P indicates DC Power, HDP indicates High Density Power, LP

indicates Low Power (MULTI-BEAM XLE connector only), S indicates Signal. The corresponding contact spacing and

voltage ratings are shown below.

ACP

HDP

0.300

′′ [7.62 mm] spacing

0.250

′′ [6.35 mm] spacing

0.200

′′ [5.08 mm] spacing

.115

′′ [3.81 mm] spacing

0.100

′′ [2.54 mm] grid

300 Volts*

200 Volts*

Connection to same voltage*

200 Volts*

60 Volts*

* With circuit board designed to UL 1950, IEC 60950

6450123-2 数据表(PDF) 2 Page - Tyco Electronics

6450123-2 数据表(HTML) 2 Page - Tyco Electronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

数据表下载