| 数据搜索系统,热门电子元器件搜索 |
|
MX29GL256F 数据表(PDF) 21 Page - Macronix International |
|
|
|||||||||||||||||||||||||||||
MX29GL256F 数据表(HTML) 21 Page - Macronix International |
|
21 / 72 page ![]() 21 P/N:PM1544 REV. 1.5, OCT. 30, 2013 MX29GL256F After beginning a sector erase operation, Erase Suspend is the only valid command that may be issued. If sys- tem issues an Erase Suspend command during the 50us time-out period following a Sector Erase command, the time-out period will terminate immediately and the device will enter Erase-Suspended Read mode. If the system issues an Erase Suspend command after the sector erase operation has already begun, the device will not enter Erase-Suspended Read mode until 20us time has elapsed. The system can determine if the device has entered the Erase-Suspended Read mode through Q6, Q7, and RY/BY#. After the device has entered Erase-Suspended Read mode, the system can read or program any sector (s) ex- cept those being erased by the suspended erase operation. Reading any sector being erased or programmed will return the contents of the status register. Whenever a suspend command is issued, user must issue a re- sume command and check Q6 toggle bit status, before issue another erase command. The system can use the status register bits shown in the following table to determine the current state of the device: COMMAND OPERATIONS (cont'd) ERASE SUSPEND/RESUME When the device has suspended erasing, user can execute the command sets except sector erase and chip erase, such as read silicon ID, sector protect verify, program, CFI query and erase resume. SECTOR ERASE RESUME The sector Erase Resume command is valid only when the device is in Erase-Suspended Read mode. After erase resumes, the user can issue another Ease Suspend command, but there should be a 400us interval be- tween Ease Resume and the next Erase Suspend command. Status Q7 Q6 Q5 Q3 Q2 Q1 RY/BY# Erase suspend read in erase suspended sector 1 No toggle 0 N/A toggle N/A 1 Erase suspend read in non-erase suspended sector Data Data Data Data Data Data 1 Erase suspend program in non-erase suspended sector Q7# Toggle 0 N/A N/A N/A 0 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |