UNISONIC TECHNOLOGIES CO., LTD

LXXLD10

Preliminary

CMOS IC

www.unisonic.com.tw

1 of 7

Copyright © 2013 Unisonic Technologies Co., Ltd

QW-R502-702.b

0.8V REFERENCE ULTRA LOW

DROPOUT LINEAR REGULATOR



DESCRIPTION

The UTC LXXLD10 is a typical LDO with the features of very low

dropout voltage as low as 0.1V at output current 1A.

For normal operation, two supply voltages are necessary. One called

control voltage from other equipment can shutdown the output voltage and

it should pull and hold the voltage of EN pin less than 0.3V. Another one is

the main supply voltage whose purpose is for main power conversion, to

keep the power dissipation low, and to make the dropout voltage lower.

Internally, in the UTC LXXLD10, there’re many functions which can

be seen in the block figure to prevent the IC from being damaged. Internal

Power-On-Reset (POR) circuit can control the two supply voltages to

prevent fault operations of the circuit; the thermal shutdown circuit is able

to protect the device from over thermal operation, and a current limit

function will keep the device work safely under current over-loads.

The UTC LXXLD10 can be used as an ideal to provide well supply

voltage in the applications, such as front-side-bus termination on

PC applications.



FEATURES

* Low ESR Output Capacitor

* ±1.5% over Line, Load and Temperature Output Accuracy

* Fast Transient Response

* Output Voltage Adjustable through External Resistors

* With internal Soft-Start

* Internal Current Limit Protection

* Internal Under Voltage Protection

* Hysteretic Thermal Shutdown

* With Power-OK Output (with a Delay Time)

* For Standby or Suspend Mode: Shutdown

HSOP-8



ORDERING INFORMATION

Ordering Number

Package

Packing

Lead Free

Halogen Free

LXXLD10L-SH2-T

LXXLD10G-SH2-T

HSOP-8

Tube

LXXLD10L-SH2-R

LXXLD10G-SH2-R

HSOP-8

Tape Reel

Note: XX: Output Voltage, refer to Marking Information.