RL78 Family

EEPROM Emulation Library Pack02 Ver.1.01

Release Note

R20UT2645EJ0100

Rev.1.00

Page 13 of 15

Mar 28, 2014

8.2

Settings of Option Byte and On-Chip Debugging

The sample program normally operates by setting the high-speed on-chip oscillator at 32 MHz.

After setting “Set user option byte” to “Yes” from the Link options of CA78K0R, specify “xxxxE8” for the value of the

user option byte and set the high-speed on-chip oscillator at “32 MHz”.

When performing on-chip debug, set “Ues on-chip debug” to “Yes” and specify “84” for the controlling value of the

on-chip debugging option byte.

Figure 8-1 Setting of Option Byte