CS3310

DS82PP3

13

PARAMETER DEFINITIONS

Dynamic Range

Full scale (RMS) signal to broadband noise ratio. The broadband noise is measured over the

specified bandwidth with the input grounded. Units in decibels.

Total Harmonic Distortion plus Noise

The ratio of the rms value of the signal to the rms sum of all other spectral components over

the specified bandwidth (typically 10 Hz to 20 kHz), including distortion components.

Expressed in decibels.

Interchannel Isolation

A measure of crosstalk between the left and right channels. Measured for each channel at the

converter’s output with the input under test grounded and a full-scale signal applied to the other

channel. Units in decibels.