Radial Lead Varistor (MOV)

3 / 4

@SOCAY Electronics Co., Ltd. 2013

Specifications are subject to change without notice.

Please refer to www.socay.com for current information.

10D Series

SOCAY Electronics Co., Ltd.

www.socay.com

20D Series

Item

Test Condition / Description

Requirement

Maximum Allowable

Voltage

The recommended maximum sine wave voltage (RMS) or the maximum DC

voltage can be applied continuously.

Varistor Voltage

The voltage between two terminals with the specified measuring current

1mA.DC applied is call Vb.

Maximum Clamping

Voltage

The maximum voltage between two terminals with the specification

standard impulse current.

Rated Wattage

The maximum average power that can be applied within the specified

ambient temperature.

Energy

The maximum energy within the varistor voltage change of

±10% when one

Withstanding Surge

Current

The maximum current within the varistor voltage change of

±10% with the

standard impulse current (8/20

ȝsec.) applied one time

To meet the

specified value

Varistor Voltage

Temp. Coefficient

0.05% /

ºC max

Surge Life

The change of Vb shall be measured after the impulse listed below is

applied 10,000 times continuously with the interval of ten seconds at room

temperature.

180K to 680K

5D Series

820K to 751K

180K to 680K

7D Series

820K to 751K

180K to 680K

10D Series

820K to 751K

180K to 680K

14D Series

820K to 751K

180K to 680K

20D Series

820K to 751K

Vb / Vb

△

Electrical Rating

Vb at 20

ºC

－Vb at 70ºC

Vb at 20

ºC

×

1

50