Emergency Stop Switch

A22E

Install in 22-dia. or 25-dia. Panel Cutout

• Direct opening mechanism to open the circuit when the contact

welds

.

• Safety lock mechanism prevents operating errors.

• Easy mounting and removal of Switch Blocks using a lever.

• Mount three Switch Units in series to improve wiring efficiency

(with non-lighted Switch Units, three Units can be mounted for

multiple contacts).

• Finger protection mechanism on Switch Unit provided as a

standard feature.

• Install using either round, or forked crimp terminals.

• Oil-resistant to IP65 (non-lighted models)/IP65 (lighted models)

Note: Be sure to read the precautions for all pushbutton switches in the

Pushbutton Switches Group Catalog (Cat. No. X018), as well as

the

“Safety Precautions” on page 19.

→

Features

Safety Lock Mechanism to Prevent Misuse

This Switch uses a finger protection

mechanism to prevent electrical shocks.

Moreover, it is provided with a mechanism

to prevent terminal screws from coming

off and also allows connection to either

round or forked crimp terminals.

Construction

Lock position

This Switch enables emergency stops only when the pushbutton is

pressed intentionally and firmly.

Even if an object or person touches the pushbutton by mistake, the

contact will not be released unless the pushbutton reaches the lock

position.

Finger protection

Mechanism for

preventing

terminal screws

from coming off

(loosening the

screws do not

cause them to

come off)

(The above figures are

examples of the lighted model.)

Color: Red

Non-lighted

Lighted

Light source

• LED Lamp

• Incandescent Lamp

Contact Ratings

10 A at 110 VAC (resistive load)

10 A at 24 VDC (resistive load)

Lighting Method

Non-lighted

Lighted (without Voltage Reduction

Unit)

Lighted (with Voltage Reduction Unit)

Operation

Unit

Lamp

Switch

http://www.ia.omron.com/

1

(c)Copyright OMRON Corporation 2007 All Rights Reserved.