Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois

60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Butt Contact Pushbutton Switches

SPECIFICATIONS

Rating Criteria

Contact Resistance: 25 milliohms maximum

on a new switch

Voltage Breakdown: 1,000 Vac between

mutually insulated parts

Insulation Resistance: 1,000 megohms

minimum

Switch and LED Operating Temperature:

-40°C to +85°C

Materials and Finishes

Switch Base, LED Base, Button and Cover:

Polyester

Shorting Bar: Phosphor bronze, gold-plated

over nickel

Switch Terminals: Brass, gold-plated over

nickel

LED Terminals: Steel, tin-plated

Spring: Tinned Music Wire

LED Information

MCD*

Viewing

Color

Min.

Max.

Angle

Red

0.8

5.0

60°

Green

0.8

3.2

60°

Yellow

0.8

3.2

60°

*MCD = Millicandellas at 2 mA

Recommended Current: 2mA

Current limiting resistor is not supplied.

ORDERING INFORMATION: Individual Units

Part Number

Description

32-01

Switch, 10 microinches gold plating, black button, red body

32-02

Switch, 30 microinches gold plating, black button, red body

32LED-RED

Red LED and holder, red body

32LED-GRN

Green LED and holder, red body

32LED-YEL

Yellow LED and holder, red body

Grayhill or your local Distributor will assemble stacks of switches, LEDs or combinations.

Example Part Number

Example part number describes a stack of 6 elements consisting of two switches, a red

LED, a green LED, a switch and a yellow LED. Shorter stacks will have fewer letters in

the arrangement definition. Contact Grayhill for stacks of more than six elements.

Basic switch part number

(see Ordering Information)

Number of ganged elements

(2 thru 6)

32-01-6-AARGYA

Arrangement definition

(left to right, front view)

A = Switch

R = Red LED

G = Green LED

Y = Yellow LED

Available from your local Grayhill Distributor.

For prices and discounts, contact a local Sales

Office, an authorized local Distributor or Grayhill.

Assemblies of Switches or Switches and LED Combinations

Assemblies of LEDs Only

Example Part Number

Example part number describes a stack of 3 LEDs, arranged red, yellow and green from

left to right. Maximum number of stacked LEDs in this part numbering scheme is six.

Contact Grayhill for stacks of more than six elements.

Basic identification for LEDs

Number of ganged elements

(2 thru 6)

32LED-3-RYG

Arrangement definition

(left to right, front view)

R = Red LED

G = Green LED

Y = Yellow LED

Pushbutton

36