EADOG

Page 4

ELECTRONIC ASSEMBLY reserves

the right to change specifications

without prior notice. Printing and

typographical

errors

reserved.

APPLICATION EXAMPLES

LOW VOLTAGE

If an external source of +10.5..+13.5V (does not

have to be stabilized) is available, the charge

pump is not needed and less external

components are required. Power supply

voltage for display and logic may be 1.8..3.3V

then.

LOW POWER

+3.0V or +3.3V (single supply) operation

requires 9 external capacitors

ZIF CONNECTOR EA WF100-04S:

As an accessory for the touch panel we do provide a ZIF connector (4 pins) with pitch 1.0mm (SMD type). This

connector is a „bottom side contact“ type.

alle dimensions are in mm