Printing and typographical errors reserved.

ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice.

Page 4

EA DOG-M

APPLICATION EXAMPLES

Different wiring must be used depending on the interface and the power supply. 2 additional capacitors

are required for 3.3 V operation.

Note that the COG technology means that the current capacity of the outputs is limited. Therefore, a

large load on the bus may cause signal loops and unclean levels. If in doubt, additional pull-down

resistors (8051) are required or additional waits/NOPs must be incorporated.

USB-TEST BOARD EA 9780-2USB

For easy startup, a USB test board is available that can be connected to a PC. An USB cable and a

Windows software is supplied with the product.This allows individual text and to be displayed directly

on the connected display.

SIMULATION WITH WINDOWS

A simulator window also displays the contents of the display. The software can simulate all the

displays and colors even without the hardware.You can download the software free from our website:

http://www.lcd-module.de/deu/disk/startdog_v20.zip