| 数据搜索系统,热门电子元器件搜索 |
|
SP43404 数据表(PDF) 1 Page - SIPAT Co,Ltd |
|
|
|||||||||||||||||||||||||||||
SP43404 数据表(HTML) 1 Page - SIPAT Co,Ltd |
|
1 / 10 page ![]() Page 1 of 10 The PE43404 is a high linearity, 4-bit RF Digital Step Attenuator (DSA) covering a 15 dB attenuation range in 1.0 dB steps. This 75-ohm RF DSA provides both parallel (latched or direct mode) and serial CMOS control interface, operates on a single 3-volt supply and maintains high attenuation accuracy over frequency and temperature. It also has a unique control interface that allows the user to select an initial attenuation state at power-up. The SP43404 exhibits very low insertion loss and low power consumption. This functionality is delivered in a 4x4 mm QFN footprint. The SP43404 is manufactured on SIPAT’s CMOS process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Product Specification 75 Ω RF Digital Attenuator 4-bit, 15 dB, DC – 2.0 GHz Product Description Figure 1. Functional Schematic Diagram SP43404 Features • Attenuation: 1.0 dB steps to 15 dB • Flexible parallel and serial programming interfaces • Parallel latched or direct mode • High attenuation accuracy and linearity over temperature and frequency • Unique power-up state selection • Very low power consumption • Single-supply operation • Positive CMOS control logic • 75 Ω impedance • Packaged in a 20 Lead 4x4 mm QFN Table 1. Electrical Specifications @ +25°C, VDD = 3.0 V Notes: 1. Device Linearity will begin to degrade below 1MHz 2. Max input rating in Table 3 & Figures on Pages 4 to 6 for data across frequency. 3. Note Absolute Maximum in Table 3. 4. Measured in a 50 Ω system. Parameter Test Conditions Frequency Minimum Typical Maximum Units Operation Frequency DC 2000 MHz Insertion Loss1 DC ≤ 1.2 GHz - 1.4 1.95 dB Attenuation Accuracy Any Bit or Bit Combination DC ≤ 1.2 GHz - - ±(0.25+ 7% of atten setting) dB 1 dB Compression3,4 1 MHz ≤ 1.2 GHz 30 34 - dBm Input IP31,2,4 Two-tone inputs up to +18 dBm 1 MHz ≤ 1.2 GHz - 52 - dBm Return Loss Zo = 75 ohms DC ≤ 1.2 GHz 10 13 - dB Switching Speed 50% control - - 1 µs Figure 2. Package Type 20 Lead 4x4 mm QFN Control Logic Interface Parallel Control Power-Up Control Serial Control RF Input RF Output Switched Attenuator Array 5 3 1 The SP43404 is a high linearity, 4-bit RF Digital Step Tel: +86-23-62808818 Fax: +86-23-62805284 www.si w.com sawmkt@si at.com 628 patsa / p |
类似零件编号 - SP43404 |
|
类似说明 - SP43404 |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |