•

North America Tel: 800.366.2266 / Fax: 978.366.2266

•

Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

•

Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2

GaAs Broadband DPDT Diversity Switch

0.5 - 3.0 GHz

Rev. V5

MASWSS0130

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Parameter

Absolute Maximum

Input Power @ 3 V Control

+35 dBm

Input Power @ 5 V Control

+35 dBm

Operating Voltage

+8.5 volts

Operating Temperature

-40

Storage Temperature

-65

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Insertion Loss

3

2.4 GHz

dB

—

0.6

0.9

Isolation

(on/off or off/on)

2.4 GHz

dB

20

25

—

Return Loss

2.4 GHz

dB

23

—

IP2

Two Tone, +15 dBm per tone, 5 MHz Spacing,

2.4 GHz

dBm

—

94

—

IIP3

Two Tone, +15 dBm per tone, 5 MHz Spacing,

2.4 GHz

dBm

—

55

—

Input P1dB

2.4 GHz

dBm

—

34

—

2

dBm

—

-80

—

3

dBm

—

-95

—

Trise, Tfall

10% to 90% RF

90% to 10% RF

nS

nS

—

—

34

35

—

—

Ton, Toff

50% control to 90% RF

50% control to 10% RF

nS

—

—

48

54

—

—

Transients

mV

—

7

—

Control Current

|Vc| = 3 V

µA

—

5

25

Input P0.1dB

2.4 GHz

dBm

—

30

—

2. External DC blocking capacitors are required on all RF ports.

3. Insertion loss can be optimized by varying the DC blocking capacitor value.

2,3

Qualification

Qualified

to

M/A-COM

specification

REL-201,

Process Flow –2.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

4. Exceeding any one or combination of these limits may cause

permanent damage to this device.

5. M/A-COM does not recommend sustained operation near

these survivability limits.