• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2

GaAs SP3T 2.6 V CDMA-GPS Switch

0.5 - 3.0 GHz

Rev. V1

MASWSS0191

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Insertion Loss

820 MHz

1.5 GHz

1.9 GHz

dB

dB

dB

—

—

—

0.65

0.70

0.70

0.80

—

—

Insertion Loss

820 MHz

1.5 GHz

1.9 GHz

dB

dB

dB

—

—

—

0.95

0.95

0.95

1.1

—

—

Isolation (GPS Path)

820 MHz

1.5 GHz

1.9 GHz

dB

dB

dB

29.0

—

—

31.0

26.0

23.5

—

—

—

Isolation (PCS Path)

820 MHz

1.5 GHz

1.9 GHz

dB

dB

dB

25.0

—

—

27.0

23.5

21.5

—

—

—

Return Loss

All RF ports, DC – 2.5 GHz

dB

—

20

—

IP3

CELL Path

PCS Path

Two Tones +22 dBm / tone, 1 MHz Spacing, 820 MHz

Two Tones +22 dBm / tone, 1 MHz Spacing, 1880 MHz

dBm

dBm

—

—

58

59

—

—

Cross Modulation

CELL Path

Cell Band: Two-tone signal input: Tx1 = +22 dBm @ 820 MHz,

Tx2 = +22 dBm @ 821 MHz,

RX interfere = -30 dBm @ 869 MHz.

dBm

—

-113

—

Cross Modulation

PCS Path

PCS Band: Two-tone signal input: Tx1 = +18 dBm @ 1880

MHz, Tx2 = +18 dBm @ 1881 MHz,

RX interfere = -30 dBm @ 1960 MHz.

dBm

—

-115

—

P0.1 dB

CELL Path

GPS Path

PCS Path

820 MHz

1.5 GHz

1.9 GHz

dBm

dBm

dBm

—

—

—

37

35

35

—

—

—

Trise, Tfall

10% to 90% RF, 90% to 10% RF

µS

—

0.05

—

Ton, Toff

50% control to 90% RF, and 50% control to 10% RF

µS

—

0.07

—

Transients

In Band

mV

—

50

—

Control Current

µA

—

2

20

Insertion Loss

820 MHz

1.5 GHz

1.9 GHz

dB

dB

dB

—

—

—

0.65

0.70

0.65

0.8

—

—

Isolation (CELL Path)

820 MHz

1.5 GHz

1.9 GHz

dB

dB

dB

30.0

—

—

32.0

27.0

24.5

—

—

—

5.

For positive voltage control, external DC blocking capacitors are required on all RF ports.

6.

Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz.