197

RoHS Compliant, ELV Compliant

12

Warning :

Part Numbering System for Automotive Devices

AGRF 800 -2

Packaging option

(Blank) = Bulk

2

= Tape and reel packaging

AP

= Ammo pack

Hold Current Indicator

Product Series

An “F” at the end of the series

indicates Pb-free version of product

AHS 080 -2

Packaging

2 = Tape and reel

Hold Current Indicator

Product Series

BD280 -1130 -10/16

Rating Current / Maximum Operating Voltage

10 = Rating current (hold current of BD device is 70%~80% of rating current)

16 = Max operating voltage is 16V (nominal operating voltage of BD device is 14V)

Typical Cap’s Size

Product Series

• Users should independently evaluate the suitability of and test each product selected for their own application.

• Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame.

• These devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should

not be used when repeated fault conditions or prolonged trip events are anticipated.

• Contamination of the PPTC material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices.

• Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, and

mechanical procedures for electronic components.

• PPTC devices are not recommended for installation in applications where the device is constrained such that its PTC properties are inhibited,

for example in rigid potting materials or in rigid housings, which lack adequate clearance to accommodate device expansion.

• Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of the device.