2

Mounting Instructions for the ADBL-A321 Lens to the Base Plate

Figure 3a. Lens bottom view

Figure 3b. Lens top view

Figure 2. Handling lens

An IGES format drawing file with design specifications for

mouse base plate features is available.

These features are useful in maintaining proper position-

ing and alignment of the ADBL-A321 when used with the

Avago Technologies Optical Sensor. This file can be ob-

tained by contacting your local Avago Technologies sales

representative.

Handling Instructions for the ADBL-A321 Lens

Several careful handling instructions must be observed

when handling lens. They are listed below:-

1. Pick up the lens at the lens side using a pair of tweezers

from the tray. See figure 2.

2. Do not touch the optical surfaces as highlighted in red

of the lens. See figure 3a, 3b.

3. It is recommended to use clean dry air CDA air blow

system to clean the lens before assembly to minimize

particle contamination.