Solid-State Relays

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2006–2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE

2

encapsulation. This double testing of every part before it

leaves the factory means you can rely on Opto 22 solid state

relays. All Opto 22 SSRs are guaranteed for life.

Accessories for the Power-Series SSRs include a safety cover,

heatsink, and a matching thermal conductive pad. See page 3.

Power Series SSRs

Opto 22 provides a full range of

Power Series relays with a wide

variety of voltage (120–575 volts)

and current options (3–45 amps).

All Power Series relays feature 4,000

volts of optical isolation and have a

high PRV rating. Some Power Series

relays include built-in LEDs to

indicate operation.

See page 4.

DC Series

The DC Series delivers isolated DC control to large OEM

customers worldwide. All DC control SSRs are LS TTL

compatible.

AC Series

The AC Series offers the ultimate in solid state reliability. All AC

Power Series relays feature a built-in snubber as well as zero-

voltage turn-on and zero-current turn-off. Transient-proof

models offer self protection for noisy electrical environments.

Z Series SSRs

The Z Series employs a unique heat

transfer system that makes it

possible for Opto 22 to deliver a

low-cost, 10-amp, solid state relay

in an all-plastic case. The push-on,

tool-free quick-connect terminals

make the Z Series ideal for high-

volume OEM applications.

Operating temperature: –40 °C to

100 °C. See page 7.

Printed Circuit Series SSRs

Opto 22’s Printed Circuit Series

allows OEMs to easily deploy solid

state relays on printed circuit

boards. Two unique packages are

available, both of which will switch

loads up to four amps. Operating

temperature: –40 °C to 100 °C. See

page 9.

MP Series

The MP Series packaging is designed with a minimum

footprint to allow maximum relay density on the printed

circuit board.

P Series

The P Series power relays provide low-profile [0.5 in.

(12.7 mm)] center mounting on printed circuit boards.

HS Series SSRs

The HS Series features an integrated

heatsink, which makes them so cool.

These relays have less thermal

resistance inside, so heat dissipates

more easily than in a standard SSR

mounted to the same heatsink. With

the heatsink built-in, you don't have

to select one from a catalog, and

installation is much easier. See

page 13.

Specifications

(all Power Series models)

•

4,000 V optical isolation, input to output

•

Zero voltage turn-on

•

Zero-current turn-off

•

Turn-on time: 0.5 cycle maximum

•

Turn-off time: 0.5 cycle maximum

•

Operating temperature: –40 °C to 100 °C

•

Operating frequency: 25 to 65 Hz

(operates at 400 Hz with six times off-state leakage)

•

Coupling capacitance, input to output: 8 pF maximum

•

Hermetically sealed

•

DV/DT Off-state: 200 volts per microsecond

•

DV/DT commutating: snubbed for rated current at

0.5 power factor

•

UL recognized

•

CSA certified

•

CE component

•

Torque specs for screws (this spec is both the

recommended torque and the maximum torque you

should use):

Control terminals, 10 in-lb (1.13 N-m)

Field terminals, 18 in-lb (2.03 N-m)