Description

These small outline high CMR, high speed, logic gate

optocouplers are single channel devices in a five lead

miniature footprint. They are electrically equivalent to

the following Avago optocouplers (except there is no

output enable feature):

SO-5 Package

Standard DIP

SO-8 Package

HCPL-M600

6N137

HCPL-0600

HCPL-M601

HCPL-2601

HCPL-0601

HCPL-M611

HCPL-2611

HCPL-0611

The SO-5 JEDEC registered (MO-155) package outline

does not require “through holes” in a PCB. This package

occupies approximately one fourth the footprint area of

the standard dual-in-line package. The lead profile is de-

signed to be compatible with standard surface mount

processes.

The HCPL-M600/01/11 optically coupled gates combine

a GaAsP light emitting diode and an integrated high

gain photon detector. The output of the detector I.C.

is an Open-collector Schottky-clamped transistor. The

internal shield provides a guaranteed common mode

transient immunity specification of 5,000 V/μs for the

HCPL-M601, and 10,000 V/μs for the HCPL-M611.

This unique design provides maximum ac and dc circuit

isolation while achieving TTL compatibility. The optocou-

pleracanddcoperationalparametersareguaranteedfrom

–40°C to 85°C allowing trouble free system performance.

HCPL-M600, HCPL-M601, HCPL-M611

Small Outline, 5 Lead, High CMR,

High Speed, Logic Gate Optocouplers

Data Sheet

Features

x Surface Mountable

x Very Small, Low Profile JEDEC Registered Package

Outline

x Compatible with Infrared Vapor Phase Reflow and

Wave Soldering Processes

x Internal Shield for High Common Mode Rejection (CMR)

x High Speed: 10 Mbd

x LSTTL/TTL Compatible

x Low Input Current Capability: 5 mA

x Guaranteed ac and dc Performance over Temperature:

–40°C to 85°C

x Safety and regulatory approvals:

-

UL recognized: 3750 Vac for 1 min. per U.L.

(File No. 55361)

-

CSA component acceptance Notice #5

-

IEC/EN/DIN EN 60747-5-2 approved for HCPL-M601/

M611 Option 060.

x Lead Free Option

Applications

x Isolated Line Receiver

x Simplex/Multiplex Data Transmission

x Computer-Peripheral Interface

x Microprocessor System Interface

x Digital Isolation for A/D, D/A Conversion

x Switching Power Supply

x Instrument Input/Output Isolation

x Ground Loop Elimination

x Pulse Transformer Replacement

CAUTION: The small device geometries inherent to the design of this bipolar component increase the component's

susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in

handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

Lead (Pb) Free

RoHS 6 fully

compliant

RoHS 6 fully compliant options available;

-xxxE denotes a lead-free product