COMMERCIAL

NETWORKING

—

OPT IC AL

FIBE R

16.17

Network Connectivity Products

Media Converters, Transceivers & Hubs and Network Tester

Media Converters for Ethernet and Fast Ethernet

Media Converters enable the connection of dissimilar network cabling types, while maintaining the same

network speed. A legacy Thinnet segment can be connected to a 10Base-T Hub or switch port with an

AX-200 Converter or, link two different 10Base-T networks together over a multimode fiber optic link with

a pair of AX-270s. Connect a legacy Thinnet segment over fiber with the AX-280 converter. The AX-5270

can be used for interbuilding links or attached to a fiber backbone.

Transceivers and Ethernet Hubs

The AX-50, 70 and 80 Transceivers enable the connection of a legacy AUI port to 10Base-T, Thinnet,

or Fiber Optic media. The transceiver is powered from the host and requires no external power supply.

The AX-509 Ethernet Hub has an AUI port which accepts UTP, Fiber Optic or BNC transceivers.

Specified for use by many U.S. Government Agencies. Includes a 110v/12v power supply.

Realtime 10/100 Base-TX Ethernet Network Test Unit

The AX-110BT Realtime 10/100 Base-TX Ethernet Network Test Unit is a cost effective way to quickly

determine a network's operating condition. Plug the unit's patch cord into the tester, then into any open

RJ-45 jack in an office, cubicle or conference room. Immediately see if the jack is a live network node

capable of either 100 Mb/s or 10 Mb/s. Next check patch cord continuity and polarity. Connect the

downlink to a PC to check NIC card link, speed and full or half duplex capabilities. Connect the uplink

to a hub or switch port to verify link and speed.

Belden Part Number

Description

Network Connectivity Products

Media Converter

10Base-T/10Base2, RJ-45 to BNC

AX-200

10Base-T/10Base-FL, RJ-45 to ST-Compatible fiber connectors

AX-270

10Base2/10Base-FL, BNC to ST-Compatible fiber connectors

AX-280

100Base-TX/100Base-FX, SC-Compatible fiber connectors

AX-5270SC

100Base-TX/100Base-FX, ST-Compatible fiber connectors

AX-5270ST

Media Converter Rack

Holds up to 12 converters and multi lead power supplies,

AX-1912-MCR

19 in. rack-mount ready

Power Supply, 4-lead 110v/12v, powers up to 4 converters

AX-270P4U

Power Supply, 8-lead 110v/12v, powers up to 8 converters

AX-270P8U

Transceivers and Ethernet Hubs

UTP Transceiver, 10Base-T, AUI to RJ-45, side port

AX-50

UTP Transceiver, 10Base-T, AUI to RJ-45, rear port

AX-50R

Fiber Transceiver, 10Base-FL, AUI to ST-Compatible

AX-70

Thinnet Transceiver, 10Base2, AUI to BNC

AX-80

Ethernet Hub with 8 RJ-45 10Base-T ports and 1 AUI port

AX-509

Network Tester

Realtime 10/100 Base-TX Ethernet Network Test Unit

AX-110BT

These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.

Media Converters

AX-1912 Media Converter Rack

AX050, 70 and 80 Transceivers and

AX-509 Ethernet Hub

AX-110BT Realtime 10/100 Base-TX Ethernet Network

Test Unit