FEATURES

◎ Plastic package

◎ Glass passivated chip junction

waveform

◎ Excellent clamping capability

◎ Pepetition rate(duty cycle):0.05%

◎ Low incremental surge resistance

◎ Typical IR less than 2μA above 10V

◎ High temperature soldering guaranteed: 265°C/10 seconds/.375",

(9.5mm) lead length, 5lbs., (2.3kg) tension

◎ Pb-free plated

MECHANICAL DATA

Case: Molded plastic over glass passivated junction

Polarity: Color band denotes positive end (cathode)

except Bipolar

Mounting Position: Any

Weight: 0.07ounce, 2.1gram

SYMBOL VALUE

UNITS

Minimu

m 5000

Watts

SEE

TABLE

1

Amps

8

Watts

400

Amps

-55 to

+ 175

℃

Notes :

2.Mounted on Copper Pad area of 0.8×0.8" (20×20mm) per Fig. 5.

3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.

◎ 5000W Peak Pulse Power capability on 10/1000μs

Peak Forward Surge Current,8.3ms Single Half Sine-Wave

Superimposed on Rated Load,(JEDEC Method) (Note 3)

Operating junction and Storage Temperature Range

RATING

Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1,FIG.1)

Peak Pulse Current of on 10/1000µs waveform (Note 1,FIG.3)

Bidirectional use C or CA Suffix for types 5KP5.0 thru types 5KP220 (e.g. 5KP5.0C , 5KP220

Ratings at 25℃ ambient temperature unless otherwise specified.

◎

Electrical characteristics apply in both directions

lengths.375",(9.5mm) (Note 2)

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

STAND-OFF VOLTAGE - 5.0 TO 250 Volts

5000 Watt Peak Pulse Power

Terminal: Solderable per MIL-STD-750, Method 2026

DEVICES FOR BIPOLAR APPLICATION

MAXIMUM RATINGS AND CHARACTERISTICS

1.0 (25.4)

MIN.

0.360 (9.1)

0.340 (8.6)

DIA.

0.052 (1.32)

0.048 (1.22)

DIA.

Case Style P600

Dimensions in inches and(millimeters)

0.360 (9.1)

0.340 (8.6)

1.0 (25.4)

MIN.

Fast response time: typically less than 1.0ps from 0 Volts to BV min.

02 | www.spsemi.cn

5KP(5000W) Series

REV.2014.05.01