FEATURES

◎ Plastic package has Underwriters Laboratory

Flammability Classification 94V-O

◎ Glass passivated junction

◎ 3000W Peak Pulse Power capability on 10/1000µs waveform

◎ Excellent clamping capability

◎ Repetition rate (duty cycle):0.05%

◎ Low incremental surge resistance

◎ Typical IR less than 2μA above 10V

◎ High temperature soldering guaranteed: 265°C/10 seconds/.375"

,(9.5mm) lead length, 5lbs., (2.3kg) tension

◎ Pb-free plated

MECHANICAL DATA

Case: Molded plastic over glass passivated junction

Polarity: Color band denotes positive end (cathode) except Bipolar

Mounting Position : Any

Weight: 0.07ounce, 2.1gram

SYMBOL

VALUE

UNITS

Minimum

3000

Watts

SEE

TABLE 1

Amps

7

Watts

300

Amps

-55 to

+ 175

℃

Notes :

2.Mounted on Copper Pad area of 1.6×1.6" (40×40mm) per Fig. 5.

3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.

2)

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

STAND-OFF VOLTAGE - 5.0 TO 220 Volts

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25℃ ambient temperature unless otherwise specified.

RATING

Peak Pulse Power Dissipation on 10/1000µs waveform (Note 1,FIG.1)

Peak Pulse Current of on 10/1000µs waveform (Note 1,FIG.3)

Peak Forward Surge Current,8.3ms Single Half Sine-Wave

Superimposed on Rated Load,(JEDEC Method) (Note 3)

Operating junction and Storage Temperature Range

3000 Watt Peak Pulse Power

DEVICES FOR BIPOLAR APPLICATION

For Bidirectional use C or CA Suffix for types 3KP5.0 thru types 3KP220 (e.g. 3KP5.0C , 3KP220CA)

Electrical characteristics apply in both directions

Terminal: Solderable per MIL-STD-750, Method 2026

◎ Fast response time: typically less than 1.0ps from 0 Volts to BV min.

1.0 (25.4)

MIN.

0.360 (9.1)

0.340 (8.6)

DIA.

0.052 (1.32)

0.048 (1.22)

DIA.

Case Style P600

Dimensions in inches and(millimeters)

0.360 (9.1)

0.340 (8.6)

1.0 (25.4)

MIN.

REV.2014.05.01

02 | www.spsemi.cn

3KP(3000W) Series